Home
Product Directory
Manufacturing & Processing Machinery
Metallic Processing Machinery
Metal Processing Machinery Parts
Product Description
Company Info
Product Description
High speed roll feeder
Advantages:
Processing_Contimuous processing with multi-stage.
High Speed_Up to 600 times/min
Universality---Regardless of the width of material, you can operate this machine by adjusting the mould.
Simple structure, economical and practical, low failure rate, easy maintenance
Feeding Accuracy
Feeding accuracy will be different according to feeding speed and stroke, generally within 0.05. It can fall into the scope of 0.01, when the positioning screw position.
Type
Single Type: Suitable for coil material(thickness below 0.15mm), single or continuous press products.
Duplex Type: Suitable for coil material(thickness above 0.15), short scale material, single or continuous press products.
One way clutch
Made of tungsten carbide steel on the contacting surface to keep rigidity, precision and durability.
The gear is hardened to HRC60° And ground to the best transmission accuracy.
Roller
High feed accuracy at exact positioning with hollow roller of less weight, and lower inertia.
Hard chrome plated heat treated to HRC60° And ground for the best rigidity and durability.
Disk Brake
Apply the best brake lining to have accracy, durability, and rigidity.
The Anti-reversing Device
The structure is same sa the one way clutch, It can precisely control the lower roller which will not reverse even for long time used as it is high in stability and precision.
The brakes will not out of control by the splashed waste oil when it is punching such cause the lower roller to reverse, and teansfer distance unprecise. It will not canse high heat.
Super hard alloy and rolling post have used. They are not easy to wear out. The acting form of the rolling posts is by circular movement, not like the four guided posts in straight line moving, so it will not stuck.
As less friction it will accursed, so the torsion it need will correspondingly reduced. And the transfer structure will not easy sear out.
Speed can be reached to 30M/min if the Anti-recersing device is fitted. In general it is 20M/min. Efficiency has been increased about 50%. Its special structure has been increased its using life.
Advantages:
Processing_Contimuous processing with multi-stage.
High Speed_Up to 600 times/min
Universality---Regardless of the width of material, you can operate this machine by adjusting the mould.
Simple structure, economical and practical, low failure rate, easy maintenance
Feeding Accuracy
Feeding accuracy will be different according to feeding speed and stroke, generally within 0.05. It can fall into the scope of 0.01, when the positioning screw position.
Type
Single Type: Suitable for coil material(thickness below 0.15mm), single or continuous press products.
Duplex Type: Suitable for coil material(thickness above 0.15), short scale material, single or continuous press products.
One way clutch
Made of tungsten carbide steel on the contacting surface to keep rigidity, precision and durability.
The gear is hardened to HRC60° And ground to the best transmission accuracy.
Roller
High feed accuracy at exact positioning with hollow roller of less weight, and lower inertia.
Hard chrome plated heat treated to HRC60° And ground for the best rigidity and durability.
Disk Brake
Apply the best brake lining to have accracy, durability, and rigidity.
The Anti-reversing Device
The structure is same sa the one way clutch, It can precisely control the lower roller which will not reverse even for long time used as it is high in stability and precision.
The brakes will not out of control by the splashed waste oil when it is punching such cause the lower roller to reverse, and teansfer distance unprecise. It will not canse high heat.
Super hard alloy and rolling post have used. They are not easy to wear out. The acting form of the rolling posts is by circular movement, not like the four guided posts in straight line moving, so it will not stuck.
As less friction it will accursed, so the torsion it need will correspondingly reduced. And the transfer structure will not easy sear out.
Speed can be reached to 30M/min if the Anti-recersing device is fitted. In general it is 20M/min. Efficiency has been increased about 50%. Its special structure has been increased its using life.
Address:
Building 3, Block a, Yuebao Industry Park, Nanpushan Tongweigangming Street, Baoan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Main Products:
Decoiler, Straightener, Nc Roll Feeder, Uncoiler, Payoff Reel, Nc Leveler, Slitting Line, Shearing Line, Coil
Company Introduction:
Shenzhen Mingcheng Mechanism Co., Ltd., is specialized in R&D, manufacturing, sales of press automatic peripheral equipment for 12 years. Our main products are NC precision leveler & feeder(3 in 1), straightener and feeder (2 in 1), nc zigzag air feeder line series, muti-process transfer robot for press, cut to length line, slitting line, nc feeder, machanical roll feeder RF series, cam drive feeder, high speed straightener, double head uncoiler and so on. Suit for processing all kinds of copper, aluminium, iron stock coil and sheet material thickness from 0.1mm-8mm, width from 10mm-1700mm. Our products are applied in auto, motor, electric appliance, electronics, furniture hardware, building materials. Our clients are byd, galanz, midea welling, broad-ocean, crc logic, dmegc, ssml, iao(Japan), SANYO, colson caster(USA), Xiamen hunterdouglas.
